The Cutting Table

If you're following our studio reorganization, here are some 'in-progress' shots.  


As we do a lot of cutting (either fabric or paper), we thought it'd be useful to have a 'cutting area.' We also thought it would be nice if the cutting surface were raised up a bit, to save our aching backs. For this section of the room, we spent $3.54 for pvc piping to help us raise our folding table to a better height. (This area will also double as a photo shoot table.)

What it looked like before:

Stage one:

This section of the room previously had Tracy's Art Therapy bookshelf (which we moved into the other room).  In order to utilize the vertical storage, we put up some shelves (that were scrounged from our storage locker). Notice the empty, clear bins? These used to house my bookbinding and print making tools (newly residing on the adjacent peg board). Now we can use them for the bits and baubles that are hidden away in the closet. We still need to create mounts for the photo lights and storage for cutting implements. We have large plastic drawers for under-the-table fabric storage, but those are still in the nether regions of the closet (there's only so much you can undertake in one day)

Here's a shot of the cutting table legs. We bought 10 feet of 1" diameter pvc & cut it down. The pvc slid right over the table leg & raised the surface about 8 inches. Because the inner diameter of the pvc equals that of the table legs, it's as sturdy as it was sans leg extensions.

Cost breakdown, if you had to go out and buy all this stuff:

3, 24-inch shelf rails: $8

9, 8-inch shelf brackets: $18

3, 8-inch by 24-inch shelves: $6 (for particle board shelves) to $16

4' Folding Table: $30 (at Lowes, Wal-mart, or Home Depot)

10' of pvc pipe: $4 (we bought ours at Lowes)

hack saw to cut pipe: $10

small white storage boxes: $8/set of 4 (at wal-mart)

Clear Sterlite bins: $1 each (on sale)

Totaling: $90-$100

Some unveiling as we go...

What it looked like before:

... and after:

WHAT WE CHANGED:

We decided to use the folding table that was previously in this spot, as a cutting table, so we moved it out of the way. We bought peg board at Lowes for $7 & painted it Appletini Green (cost $14). We hung the board above the desk to utilize the vertical wall space. I hung most of my bookbinding and printing tools on the board (I already had all the peg board hardware). By doing this, I freed up a lot of drawer and bin space & now, not only can I see all of my tools, they're within arms reach.


My mother, so graciously, sent us a set of IKEA legs to match my other desk. (I think they cost her $12 each on sale). I love the look of these legs AND they have storage shelves! The table top scrounged from storage is a little smaller than I'd remembered, but still works.  I screwed little plastic hardware stackers (that I've had since college; I think they're sold in sets pretty inexpensively) to the underside of the desk to store my bookbinding needles, spools of waxed linen, pencils, and utility blades.

Instead of sending my coffee and tin cans to the recycling bin, I cleaned them out and repurposed them for tool & linen cord storage. (I covered the coffee can with a scrap booking paper we found on sale before Christmas).

Right now, the laser printer is on the floor next to the desk. When I can afford to buy some scrap lumber, I plan on making a small stand for it.


So, this is stage one. We still have much organizing to do, but we made HUGE improvements to this space for just over $20. not bad.


Here's a basic cost breakdown if you were to go out and buy all this stuff yourself:

Peg board: $7 for 4' x 4' particle board
Peg board hardware: $10-$20
Peg board hanging kit: $3
paint: $14 (add $2 for foam brushes if you don't have any)
Desk Legs: $16-$24 for the set
Desk top: $10-$30 (depending on size, thickness, & finish. Plain pine is cheapest)
Small hardware stacking bins: $4 for 3 bins


Total: $64-$102